
Add to Cart
Switch Cabinet Heater
Silicone Heating Plates beneficial to take out liquid and coagulum from drums easily by heating, such as adhesive, oil, asphalt, paint, paraffin wax, oil and various resin raw materials in the drum. It can make viscosity of materials descending and uniform by heating the drum, and reduce the power of pump. Therefore, the heater does not be restricted by seasons, and can be used throughout the year.
Benefits
Cabinet heater can be used to the heating and heat preservation of all kinds od cabinets and boxes, such as cubicle switchboard,communication cabinet, linghting box, antiflocculation box , computer, etctucture.
For this type heater, we can produce mounting holes for easy install and there is aluminum plate on the back of the heater. We have normal size(RDB type) and also we can produce as custom made.
How to make a order of silicone rubber heater:
Size, Wattage & Voltages are available on request.
1) size.
When looking for a heater quote, the size of silicone rubber heater is needed.like width,length,thickness etc.
2) Voltage
The right voltage is according to your application.low voltage:like 12V silicone rubber heater,24V silicone rubber heater.
3) Wattage
The right wattage is essential for silicone rubber heaters. The wattage needs to be matched to the heater area heated, it’s intended resistance, temperature, and materials.
4) Wire type
The wire type is also according to your application, you can refer to the picture of silicone rubber wire type.
Normal size:
Model | RDB-50 | RDB-70 | RDB-100 | RDB-150 | RDB-250 |
Size(mm) | 90x150 | 100x210 | 120x185 | 150x200 | 150x300 |
Power | 50W | 70W | 100W | 150W | 250W |
Accessories optional:
Name | Model | Specifications |
Leading line | PTFE wire UL1332 | 300V,26AWG-10AWG |
PTFE wire UL1330 | 600V,26AWG-10AWG | |
PI line | 300V,30AWG-20AWG | |
Silicone rubber line | 300V,0.5mm2-2.5mm2 | |
Glass fiber line | 300V,0.5mm2-4mm2 | |
3M glue | 468/467 | working temperature ≤ 149℃ |
966/9079 | working temperature ≤ 179℃ | |
9888T | working temperature ≤ 119℃ | |
Controller | OT1 | 0-200°C JPt 100Ω sensor |
OT3 | 0-300°C PID controller | |
OT4. OT5 | 100ºC | |
EGO | 0-40ºC 30-110ºC 60-200ºC | |
Thermo | 50ºC 70ºC 100ºC 120ºC 150ºC |